|
Description
|
Category
storage_target
Sub-Category
driver
Description
mt and tar (star) seem to work fine with DAT72 cartridges, but when I try to access or create DDS-3 tapes my system crashes with a dump.
Frequency
Always
Regression
No
Steps to Reproduce
connect DAT72 drive, insert DDS-3 tape, and invoke
# mt status
Expected Result
# mt status
HP DAT-72 tape drive:
sense key(0x6)= Unit Attention residual= 0 retries= 0
file no= 0 block no= 0
Actual Result
system crash with dump
Error Message(s)
Test Case
Workaround
Submitter wants to work on bug
No
Additional configuration information
# uname -a
SunOS amilo 5.11 snv_93 i86pc i386 i86pc
# mt -f /dev/rmt/0 config
"HP C7438A", "HP DAT-72", "CFGHPDAT72";
CFGHPDAT72 = 2,0x34,0,0x18659,4,0x47,0x47,0x47,0x47,3,120,420,3600,36000,3600,3600,17400;
# cfgadm -v usb1/1
Ap_Id Receptacle Occupant Condition Information
When Type Busy Phys_Id
usb1/1 connected configured ok Mfg: Hewlett Packard Product: DAT72 USB Tape NConfigs: 1 Config: 0 : Full Speed
indisponible usb-storage n /devices/pci@0,0/pci10b9,5237@f:1
dump available upon demand
pls provide core file for debugging.
Thanks.
|
