|
Description
|
I have two opl systems with Atlas QGC and 2XGF cards. I also have northstar cards
installed. When I start stress testing with S10U4_7 I get these notice messages.
May 17 09:10:23 s16-9 nxge: NOTICE: nxge_ipp_eccue_valid_check: rd_ptr = 97 wr_ptr = 97
May 17 09:10:28 s16-9 nxge: NOTICE: nxge_ipp_eccue_valid_check: rd_ptr = 321 wr_ptr = 321
After seeing these FMA starts outputing error messages. These messages just keep filling
the console log. After the test completes and the messages do not stop. I have to reboot
to stop dumping to console. I am seeing some issues with results but for the most part
the results look ok. Still evaluating the results logs.
I am seeing this with S10U4_7 and with S11_64. I did not see this with S10U3_RR plus KU.
SUNW-MSG-ID: FMD-8000-0W, TYPE: Defect, VER: 1, SEVERITY: Minor
EVENT-TIME: Fri May 18 09:16:49 PDT 2007
PLATFORM: SUNW,SPARC-Enterprise, CSN: mpk-dc1-8, HOSTNAME: s11-9
SOURCE: fmd-self-diagnosis, REV: 1.0
EVENT-ID: 0c76e63a-d3a4-457a-d056-f6d3fc29f37c
DESC: The Solaris Fault Manager received an event from a component to which no automated diagnosis software is currently subscribed. Refer to http://sun.com/msg/FMD-8000-0W for more information.
AUTO-RESPONSE: Error reports from the component will be logged for examination by Sun.
IMPACT: Automated diagnosis and response for these events will not occur.
REC-ACTION: Run pkgchk -n SUNWfmd to ensure that fault management software is installed properly. Contact Sun for support.
# fmadm faulty -a
STATE RESOURCE / UUID
-------- ----------------------------------------------------------------------
# fmdump -v -u 0c76e63a-d3a4-457a-d056-f6d3fc29f37c
TIME UUID SUNW-MSG-ID
May 18 09:16:49.3292 0c76e63a-d3a4-457a-d056-f6d3fc29f37c FMD-8000-0W
100% defect.sunos.fmd.nosub
Problem in: -
Affects: -
FRU: -
Location: -
|
