|
Description
|
yinxing:/>>dladm show-dev
iprb0 link: unknown speed: 100Mb duplex: unknown
ipw0 link: down speed: 0Mb duplex: unknown
ath0 link: down speed: 0Mb duplex: unknown
yinxing:/>>dladm connect-wifi -k testkey -s wep -e dlink ipw0
yinxing:/>>dladm show-wifi
LINK STATUS ESSID SEC STRENGTH MODE SPEED
ipw0 connected dlink wep excellent b --
ath0 disconnected -- -- -- -- --
yinxing:/>>rem_drv ath
yinxing:/>>dladm show-dev
iprb0 link: unknown speed: 100Mb duplex: unknown
ipw0 link: down speed: 0Mb duplex: unknown
yinxing:/>>ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
iprb0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 129.158.218.99 netmask ffffff00 broadcast 129.158.218.255
ether 8:0:46:ce:4:6d
ipw0: flags=201000803<UP,BROADCAST,MULTICAST,IPv4,CoS> mtu 1500 index 3
inet 0.0.0.0 netmask ff000000
ether 0:c:f1:3a:b4:fb
yinxing:/>>dladm connect-wifi -k testkey -s wep -e dlink ipw0
dladm: cannot connect link 'ipw0': operation failed
#dmesg
.....
Mar 1 16:44:56 yinxing ipw: [ID 451854 kern.warning] WARNING: ipw0: ipw2100_init(): could not load microcode, try again
Mar 1 16:44:56 yinxing genunix: [ID 656338 kern.warning] WARNING: wifi_cfg_wepkey: abort, create key failed. id=0
|
